雪佛兰SS名片夹

Chevelle SS Business Card Holder

2024-04-17 07:32:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

70 Chevelle SS Business Card Holder. I was trying to find the front end of a Chevelle from the early 70's to make a remix of as a business card holder for a friend. Was able to find this 3D model of a 70 el Camino SS; which, basically has the same front end. I used Tinker Cad to make edits and create a space to hold business cards.

will print at .20mm; but recommend .16mm for a finer quality. Tree supports (slim) are also recommended for under the wheel wells. That said, if you rotate 90 degrees, expect the tree supports to most likely leave marks on the inner piece (where the business cards sit). Sanding and careful trimming will be your friend in that scenario.

To help with smoothing out the hood (if you print normal placement), highly recommend ironing. If you want to tinker with it, you could probably manually refine the ironing even more for a smoother hood. You can also rotate the model 90 degrees to eliminate lines on the hood.

I have printed this file numerous times with no issues. Open to feedback and please feel free to share remixes and post your results.