KP3s螺旋轴Z轴支架

Lead screw Z Axis Mount for KP3s

2024-04-29 23:55:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For the modification to linear rails I used "https://www.thingiverse.com/thing:5384505".
Thera are no problems, everything works perfect.
Many thanks to LoZa.

This remix shall bring the lead screw as parallel to the linear rails as possible.
I did not install the T8 anti backlash screw.

The Z-axis print height is still 180 mm.
10mm more would still be possible (see picture)

BOM

Spring D4x8mm
2x screw M3x35mm
1x screw M3x12mm

Print Settings

Printer brand:
Kingroon
Printer:
Kingroon KP3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
35%
Filament brand:
Eryone
Filament color:
Red
Filament material:
PETG
Notes:
use wall ordering "outside to inside"

Tags

kingroonkp3s kingroon kp3s kp3s Z-Axis z axis

License

CC BY-NC-SA

Lead screw Z Axis Mount for KP3s
byUSGis licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.

KP3s螺旋轴Z轴支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型