2英寸WS2811像素矩阵-像素安装调整

Pixel WS2811 LED Matrix 2 Inch Spacing - Pixel Mount Adjustment

2024-04-30 00:26:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made 3 major changes to the mesh parts that I required, the first is I set the mesh thickness for each pixel mounting hole to 1.5mm which allows the mesh to snap into a standard 12mm pixel mounting grove! The second is I increased the pixel mounting holes diameter to 12.2mm which gives the pixel a snug but accommodating fit! Third is I added an extra 3mm tab to the edge of each border pieces pixel mounting hole! This prevent the edge from splitting open when a pixel is pushed into the mount holes.
A few tips I used when working with the mesh, assemble your mesh on a table or bench and use a dab of hot glue on each joint to hold the mesh together so it can be more easily zip-tied together. As with other props I find it's easiest to use pixel pliers and a half inch deep socket for installing pixels! push the pixel in with the pliers while pushing from the opposite side using the socket.