微比特与电池组支架 3D 模型

micro:bit and battery pack holder

2024-04-30 01:09:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have a class set of micro:bits, and wanted to make a holder for both the boards and the battery packs to limit the inevitable yanking of wires. The design was originally prototyped in TinkerCAD, then fine-tuned (and made parametric) in OpenSCAD.
There are .stl files here for the three sizes of battery pack I have (the standard AAA with no switch, AAA with power switch, and AA with power switch), and I have included the OpenSCAD file for the battery holder so it can be easily modified if your battery pack is a little different. There are .stl's for the battery packs connected to the microbit card slot, as well as separate, so that you can create your own arrangement if you like.

NOTE: supports are required for both the card slot and battery holder, I use support enforcers as shown in the picture.