电池组支架

Battery-pack-holder

2024-04-29 01:52:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

2xAA battery box mount for ASTRO A50 headset (13mm post)

Print Settings

Printer brand:
Tronxy
Printer:
Tronxy X5SA/X5ST/Pro/2E/D01 Plus
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3mm
Infill:
100%
Filament brand:
GEEETECH
Filament color:
GOLD/COPPER
Filament material:
PLA or any hardish filament
Notes:
Designed this to fit a 2xAA battery box to the posts on the Astro A50 headset. I made an LED head tracker for the freetrack program. (It is not pretty but I made it before I had a 3D printer. It works great though) Originally used velcro to fix it to my old headset. I had no sensible way to fix it to the Astro so I made this to fit to the post. The battery pack is fixed to the head tracker and just slides in and out of the mount easily. The hole for the post may be a little small depending on your printer settings. I just heated it with a lighter enough to make it flexible and forced it on. It then shrank back and is tight. If it is too loose heat it and pinch it slightly or use some kind of sticky tape to make a tight fit. When on the head, the posts are not vertical but freetrack or trackhat does not care about that. It may fit other head sets with a 13mm post. Print with supports if you need to. Should print without supports if you go slow with bridging. And plenty of cooling.

电池组支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

DOOM（2016）超级散弹枪（改进版并缩放）
2023-03-26
Arduino学习工作站
2023-03-26
Lian Li PC-B25F机箱前板（顶部IO接口，配备USB 3.0）
2024-01-14
乌克里乐五声音阶结构模型
2024-03-19
ZOHD Altus 大疆 O3 前部
2024-04-29

最热下载

最新模型