光翼之蝶

Lucent Moth

2024-04-30 02:35:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Lucent Moth from Destiny 2.
Edited from in-game file, to make it printer-friendly
Design © Bungie

Filaments used:
Body: Filamentum PLA Extrafill Wizard’s Voodoo
Wings: Filamentum PLA Crystal Clear
Base: Addnorth E-PLA Glitz Sapphire and Filamentum PLA Crystal Clear Iceland Blue

There is a file with the moth and wings merged, for resin printing.

Suggestion:
Paint the face and eyes with acrylics.
Print the wings with transparent filament and blush them with soft pastels or shimmers for a neat look.
And blush some feathers for the antenna

The crystals on the wings are quite fragile at the default size, so I do not recommend printing them any smaller. Be careful when removing supports. Might require some sanding.
I also suggest printing the wings at 100% infill

Pause the Base before the crystal prints, and change filament, or use AMS