大师剑墙面挂件

Master Sword Wall Mount

2024-04-30 06:07:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wall Mount for my remixed Master Sword. Put some craft foam and upholstery leather where the sword sits on the hangers so it wouldn't damage the paint. Needs 3/16 inch steel rods for the hanger parts, and 8 nails to mount on the wall. I would recommend you go into a stud on at least one of the back nails. There are 4 slots for nails that will slide down onto the nail once mounted, and 4 for the front, just for more stability. If you want more holes just drill out more.

The hangers slide in from the back, might be a tight fit. You can finish it to make it look nicer, or leave it as is once assembled. Has the Triforce Phoenix thing as well, thought it would be a nice touch. Really can't see it when the sword is on it though.