索尼ZV-E10 60mm镜头冷却器

Sony ZV-E10 60mm Cooler

2024-04-30 07:46:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For this cooler do work I'm assuming you will be using an external power bank.
Tested inside a theater, and I was able to record 1 hour uninterrupted, can last for more than this.

List of stuff you will need:

1 x PD/QC decoy (23.4mm x 12mm x 4.3mm)
In the decoy you can select different levels of voltage, 5v, 9v or 12v.

1 x 60 mm cooler (I recycled one from a power supply, but if you can afford a noctua, you should go for it. There are two side usb thing covers, a small if you are going to cut and solder the cable directly into the PD board, or a fat that should have some space if you don't want to cut anything and use a female PC fan adapter, but I didn't test it to check.)

(Those m4 parts are more structural and aren't really needed)
2 x m4 screw 50mm
2 x m4 nut

4 x m3 threaded insert 8mm
2 x m3 threaded insert 3mm
4 x m3 threaded insert 5mm

8 x m3 screw 30mm
2 x m3 screw 16mm

3 x m2 threaded insert 6mm
4 x m2 threaded insert 5mm

4 x m2 screw 6mm
3 x m2 screw 8mm

1 x 1/4-20UNC screw 15mm
1 x 1/4-20UNC wing nut

索尼ZV-E10 60mm镜头冷却器

朋友，你觉得上面这个模型，属于下面的哪个分类？