索尼克经典版3D模型

Sonic - Classic - MMU

2024-05-01 01:40:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

MMU version of Sonic - Classic

Sonic is a blue hedgehog who can run at supersonic speeds and curl into a ball to attack enemies. He races through levels, collecting power-up rings and avoiding obstacles, as he seeks to defeat the mad scientist Doctor Eggman.

The model, as presented is 80mm tall.

This MMU model was derived from my non-MMU model (reworked for a clean MMU print).

Enjoy!

Print instructions

Important: I used six colors for this print
---------------------------_

I've included a Prusa Slicer 3MF file that I used for this print. I paused the print after the red finished and swapped in the black to get the six colors.

Individual STL parts are also included for other slicers. The order of the parts in the slicer should be in the same order as the parts are numbered to achieve the best depth of color.

Extra note: If you only have a four color multimaterial printer, after the red finishes swap in the skin color and assign blue to the black parts. This will give you five colors but should still look nice.

Be sure to check/set the purge amounts for the colors based on your filament brand.