进阶指南：Artin电动方程式赛车1:43模型
Improved Guide for Artin Slotcars 1/43
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a guide for Artin or Artin style 1/43 slot cars.
It requires a 6mm M2 screw
IMPORTANT:
There are 2 styles depending on the car you have, see the photos.
- Type A for flat bottom. - Big thanks to Tanner who helped with this design.
- Type B for bottom with original pin raised.
Very simple and clean adaptation, just remove the pin and install it with an M2 screw (6mm).
Adjust the screw all the way but without locking the guide.
For type A this is all you need.
For type B If you want a guide that rotates 360º, you don't need anything else and it's a good improvement over the original pin.
But the best is to limit the rotation limit, you must place a small wire with diameter of +/-0.8mm (I cut from a small paper clip) in front of the screw sticking out +/-1mm
You can see this Video with similar instructions for Carrera Go:
https://youtu.be/lZndDl9fL_o?si=WBp5imAmuvcvKiYz
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.12mm
License
Improved Guide for Artin Slotcars 1/43
byIoquesis licensed under theCreative Commons - Attribution - Non-Commercial - No Derivativeslicense.
相关内容
联系我们
热门推荐
-
Pebbles弗林特斯石：活力四射的小 Pebbles2023-03-27 -
参数化Whynter AC排气管道接头3D模型2024-01-04 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
三脚架快速下放板2024-03-28 -
HGX lite v2支架2025-07-18
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
猫咪零食球2024-03-29 -
原神优菈2025-06-27 -
HGX lite v2支架2025-07-18
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
龙珠孙悟空，无需支撑2025-07-19 -
一体打印行星齿轮2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24