小型浇水罐

Small Watering Can

2023-03-26 20:48:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Also featured - slightly scaled up - by Angus in Maker's Muse on YouTube.

I needed a small watering can for the office, so I designed one after my fancy. I decided to make it a vase, because I just love those seamless surfaces and I had an idea how to incorporate a rigid grip (that worked very well).

It holds up to about 150 ml, which should be plenty for my good old Zamioculcas, Bonsai, cacti or other succulents.

Of course you can use it as a coffee milk jug as well, just please take care to print with a food safe material then.

I always use concentric bottom layers for this, linear infills tend to have minimal gaps at the outer edges. If your print still leaks, you can try to increase the extrusion multiplier a tiny bit and/or add more bottom layers. It also helps to print slow, about 40 mm/s max.

I'd love to see your Make! :)

小型浇水罐

朋友，你觉得上面这个模型，属于下面的哪个分类？