猛男啤酒龙头

Dynamite Beer Tap

2024-05-01 09:26:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3 sticks of dynamite with a 5/8" threaded hole in the base to suit a brass insert beer tab adapter.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Doesn't Matter
Infill:
20%
Filament brand:
Tianse
Filament color:
Red
Filament material:
PLA
Notes:
I printed this with and without supports. With supports left a crisper bottom edge on the bands, but without was barely noticable as well.
I printed this in the vertical orientation.
The 3 part wick is intended to be printed in 3 parts, using black PLA, then superglued in to the dynamite after. This allows the wick to be printed in the flat position, resulting in a stronger print.

Post-Printing

After printing the 3 piece wick will need to be super glued in to he top of the dynamite. You may need to drill the holes a bit larger if it doesn't fit immediately.

I also wrapped the bands in black tape to give the appearance of seperate material for them.