富士X100V/X100VI相机49mm-52mm滤镜转接环（角型版本II）

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II

2024-05-01 13:02:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II

This model is allowing to use more common 52mm filters on Fuji X100 series cameras.

Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of Fujifilm X100V and X100VI cameras. Adapter is 9.1mm long to support full range of close up focusing. Tight fit with lens and filter is making camera weather protected and most important - sealing lens front from any dust migrating to sensor, but you have to accurately clean the lens front from any dust before mounting adapter.

NOTE: the model has exact 49mm and 52mm thread sizes and may expand a bit, so it is recommended to scale up X and Y axis in slicer to 101% - 102%. The one on pictures is printed with Print Settings listed below after scaling up XY to 101%.

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.2
Filament brand:
ELEGOO
Filament color:
Black
Filament material:
PLA
Notes:
Scale XY to 101% in slicer, set first layer width to 90%
For 0.4mm nozzle use default 0.4mm line width and print speed 50mm/s