富士胶片X100VI相机手柄+Airtag存储

Fujifilm X100VI Handgrip + Airtag storage

2024-04-11 18:33:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm a guy with big hands and I wanted to have some more grip on my lovely black Fujifilm X100VI. Before I buy a grip from a brand, I wanted to test out if I could make it with my printer. Also this camera is quite expensive so I added a hidden Airtag compartment in case that I would forget it somewhere.

The screw I used was from an old Agfa camera, the screw head diameter of mine is 18 mm, I think that the max. is 20 mm. The Airtag fits nice, it has +- 1 mm diameter clearance and in height also +-1 mm clearance. It doesn't wobble or make noise because the Airtag is attracted to the magnet of the build-in speaker of the camera.

I made the Handgrip out of PLA with 0.2 mm layerheight with the standard Ender 3 pro + glass bed, it's already quite rigid/stiff so if you guys/ladies make it out of something stronger, it will surely not brake.