YakAttack NK油门底板

YakAttack NK Throttle Base Plate

2024-05-02 04:12:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an adapter plate for YakAttacks Torqeeto Throttle mount.
Linked Here:https://www.amazon.com/dp/B07G82GX2T?

I found that i could not find any direct fit mounting for Newports NK series motors. and the one on this mount although mounted up. it looked bad and didn't quite fit.

This part is designed specifically to use all of the hardware that comes with the Yakattack mount. It will also mount exactly the same way as the original base plate was.

For Part orientation while printing. Just lay it flat with flat side with countersunk holes facing downward. No supports or anything needed.

It does not need any new hardware what so ever.

I also have an additional accessory
Linked Here: (uploading now)

This accessory is meant to slide over the original throttle handle and give an actual handle feel to the throttle. It's Optional and settings and stls are provided there.

I will be doing a very limited run of these parts if anyone is interested in commissioning this and do not want to go through any of the multitude of 3d printing service sites.
Materials i have on hand and use will be up to the person although i have a TON of colors in ABS as well as Carbon Fiber Polycarbonate (PCCF)
The pictures for this are printed with PCCF

Just message though thingiverse for quote if interested

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.2mm Layer Height
Infill:
40% or More
Filament brand:
Any
Filament color:
Any
Filament material:
PETG, ABS, PC, NYLON
Notes:
Given the nature and use of this item where the kayak will be exposed to heat outdoors. I'd use any filament that has a higher melting or transition temp then PLA. I would NOT recommend PLA for this project.