Leatherman Wave 多功能工具套装及皮带扣

Leatherman Wave Multitool Sheath and Belt Clip

2024-05-02 08:42:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Sheath and belt clip for the Leatherman Wave multitool. Insert narrow side (non-plier side) down; there are detents which should let the tool click into place to retain it via the spring loaded blade releases.

There are 2 belt clip options; both can be slid into the main sheath in the vertical or horizontal positions; it is meant to be a tight fit so you may need a tool to seat/remove it. These are the same clips from my Gerber MP600 sheath athttps://www.thingiverse.com/thing:6604510

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Filament brand:
Any
Filament material:
PETG
Notes:
PETG probably the best choice for durability. Print the sheath vertically with the bottom on the print bed. The clips should be printed laying on either side (it is symmetric). Play with settings in the slicer (like alternate extra wall, etc) for strength; the examples in the photos are printed with fuzzy skin to create a more interesting texture.