杯具堆叠器

Mug Piler

2024-05-02 16:43:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are two designs to pile up mugs in places where there is not much horizontal space. There are two versions, the O and the X. The X is much faster to print, but not as stable as O. Print them both and decide which one you like most.

These are designed for the 8cm diameter mugs.

Resize the model to your mug size. Walls are 1mm in each side, so if your mug has 10cm of diameter, resize the model to 10.2cm (I would suggest to 10.3cm, since that 1mm in each side is also resized).