捕捉无限玩具

Grab Toy Infinite

2023-03-26 20:54:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Grab Toy Infinite

Introduction:

A variation of the Grab Toy ++ (https://www.thingiverse.com/thing:2750749) where the number of expansion frames is a parameter; this way you can make the thing as large as you want.

I guess there is a limit of how large you can make it before hinge friction and mass of the thing prevents proper opening and closing but I have no idea what this limit may be. Also, depending on the material, a huge thing may snap under its own weight!

The PLA print in the photos is 6 frames long, which still kind of works although the grip at the jaw end is not very strong.

Please note that the STL file with the 10-frame GrabToy has only been included to show the OpenSCAD code can generate things as large as you want. I haven't printed it, so I cannot confirm it will function properly. In fact, having seen the 6-frames print I very much doubt the 10-frame version will be even able to fully close the jaws. In any case, if you do print it please tell us how it went!

Main routine:

GrabToyInfinite(N): generates a grab toy with N expansion frames. The corresponding number of hinges is 3*N+1.

Set global variable N to the desired value and press F6 to render. Keep in mind that more frames means longer time to render. Some indications: for N=10 it takes 12 minutes for my rusty i7-920 to render the thing at moderate quality and 42 minutes at high quality; for N=6 it takes 26 minutes at high quality).

Enjoy!

Update 22/03/2018: EviGL managed to print the 10-frame version and it actually seems to function! So I thought, well, I guess now it's time to render a 15-frame version? Took 1h10min for OpenSCAD to generate the STL!

捕捉无限玩具

朋友，你觉得上面这个模型，属于下面的哪个分类？