12格2x2x2抽屉（适用于<30个轴向组件）

12 Compartments 2x2x2 Drawer (Ideal for <30 axial components)

2024-05-03 00:22:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix from:https://www.thingiverse.com/thing:3873672/remixes

I made a drawer with 12 compartments for the "BoxMiddleMiddle_2x2x2.stl" on the original post.

I made this using the provided "Drawer_2x2x2_six_compartments.stp", I just add 6 extra walls between the compartments, no changes on size, this means you can print with the same config you used to print the 6 compartments one.

This is ideal for low amount of axial components like under 30.
To pick up a component from the drawer you will use 1 finger and place a little pressure between your finger, the component and the wall of the compartment, then you will slide the component up.