HoMM3 3D模型棋盘游戏地图格子与存储系统

HoMM3 Board game - Map tile grid + storage

2024-05-03 00:37:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Map tile grids for the Heroes of Might and Magic 3 Board game, to stop those pesky map tiles slipping all over and coming apart.
Also storage for them, as well as an additional coin holder for the tokens in the game.
The tile grid holder itself will hold 20 tile grids.

Only setting that I'd change is wall thickness to 1.6mm
Otherwise whatever you typically print with should be fine.

You will likely need to manually line up the text file with the lid when printing if you want to have them be seperate colours like mine. In my case, I printed the text first, re-dialled in my height offset to account for it (cause my BLtouch probed the printed layer), then changed filament out to print the lid file.
In Cura, with the lid at XYZ 0, the text was at X:-0.56mm, Y:-0.39mm.

Lid and base are designed for 3mm Diameter, 2mm thick magnets to be glued in such as those that can be found on Amazon;https://amzn.eu/d/dEUi30m