LED电球：搭配USB-C接口Wemos D1 mini小板

LED Pokeball with USB C Wemos D1 mini

2024-05-03 04:26:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3D printed Logo design of a Pokeball.

The Logo is made out of 4 pieces and one several LED stripes that go along the inside.
I used WS2812b, but you can also use standard 12V single color RGB Stripes.

You can fit a Wemos D1 mini ESP8266 Controller into the bottom to control the LEDs. These Controllers are pretty cheap to get. I installed WLED software for Full RGB customization.
I wanted to Power the Logo with USB-c, so I made an Adapter.

The bottom two pieces are made of black PETG and the diffusors should be printed with white PETG. But you can print everything with PLA.