Mirage III 外国型号
Mirage III Foreign Variants.
2024-05-03 05:37:09
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
A few more Mirage variants based on the Mirage III byCaptain_Ahab_62
. Might update later with more Mirage variants (namely Mirage IIIS and Atlas Cheetah)
Mirage V
- Simply a Mirage III with various electronics removed (namely the radar, resulting in the new "slim" nose) designed for Israeli desert operation. However, France's 1969 Arms Embargo to Israel prevented any Mirage Vs from being sold to them. Israeli intelligence stole plans for the Mirage V and built their own unlicensed copy, called the "Nesher".
Kfir Gderot
- The SNECMA Atar 9 engine in the Mirage V was found unsatisfactory and very weak by Israel. As a result, a complete redesign of the Mirage V ("Nesher") was undertaken, adding a new aux. intake in the vertical stabilizer strake, the J-79 engine from an F-4 Phantom, and reworking the bottom "lump" under the fuselage to be further back and more angular for including flare/chaff dispensers. The early Gderot did not have the large canards of the usual Kfir family.
Kfir C.2
- The first "real" Kfir, the C.2 has the large canards remniscient of the Kfir family, added to increase stability and manouverbility.
Milan
- The Milan is a mix of the Mirage III and V, designed to fulfill the Swiss air force's requirement of a new strike aircraft that manouvered better than the Mirage III. The Milan is essentially a Mirage V with special "pop out" canards (nicknamed "whiskers" or "mustache" by test pilots) in the nose that deploy at low speed to increase manouverbility and lower the take-off and landing speed. Whilst the canards were retracted during high speed flight in real life (making it look almost identical to a Mirage V, besides the shorter vertical stabilizer strake), i have modelled the canards in the "deployed" position.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1
- Rafts:No
- Supports:Yes
- Resolution:0.16mm Layer Height
- Infill:40%
- Filament brand:
Inland
- Filament color:
Gray
- Filament material:
PLA
Tags
Mirage III 外国型号朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
丁丁火箭3D模型2023-03-27
-
复活节小熊猫3D模型2023-03-31
-
D4 4W太阳能板充电器支架基础2024-03-25
-
螺母与螺栓0.6毫米公差测试2024-04-22
-
拳击手套帽2024-05-01
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26
-
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
-
NA Miata车灯遮光条折叠机构顶盖2024-04-15
-
CZ455 452 512 弹匣底板2024-04-22
最新模型
-
FPV遥控纸飞机(机身)STL 3D模型2025-09-16
-
Clatronic吸尘器管子夹锁2024-05-08
-
波顿·罗宾逊卡莫吉钥匙扣2024-05-06
-
比尔泰马维夫特2024-05-06
-
1:400机场终端模型2024-05-06