Cybee卡车模型

Cybee truck

2024-05-03 14:51:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Layer Height: Increase the layer height slightly to 0.3mm. This will reduce the number of layers required to complete the print, speeding up the printing process while still retaining reasonable surface quality.
Print Speed: Raise the print speed to around 60-80mm/s for faster printing. This increased speed will accelerate the movement of the printer's nozzle, reducing the time taken to deposit each layer.
Infill Density: Lower the infill density to 10-15%. A lower infill density reduces the amount of material used to fill the interior of the print, decreasing printing time without significantly compromising structural integrity.
Print Temperature: Set the nozzle temperature to the lower end of the recommended range for your PLA filament (around 200-210°C). This lower temperature helps speed up the extrusion process while still ensuring proper filament flow and adhesion.
Build Plate Temperature: Maintain a build plate temperature of around 50°C for PLA filament. This moderate temperature helps improve bed adhesion without significantly impacting print time.
Retraction Settings: Use moderate retraction settings, such as a retraction distance of 6-7mm and a retraction speed of 40-50mm/s. These settings help minimize stringing and oozing between print moves without slowing down the printing process too much.
Cooling Fan: Ensure the part cooling fan is enabled and set to 100% after the first layer. Proper cooling helps improve overhang performance and print quality without significantly affecting print speed.
First Layer Settings: Maintain a first layer height and width slightly higher than subsequent layers for better adhesion. However, keep the first layer print speed relatively low (around 20-30% of the overall print speed) to ensure proper bed adhesion and print quality.

this was a design project that was designed at the university i attend , group effort .

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
No
Infill:
12
Filament brand:
creality
Filament color:
black
Filament material:
pla
Notes:
I added more layer height .03, a retraction distance of 6-7mm, retraction speed of 40-50mm/s. These settings help minimize stringing and oozing between print moves without slowing down the printing process too much.First Layer Settings: Maintain a first layer height and width slightly higher than subsequent layers for better adhesion. However, keep the first layer print speed relatively low (around 20-30% of the overall print speed) to ensure proper bed adhesion and print quality.