湿式套件储罐/液压罐

Wet kit tank/ hydraulic tank

2024-05-04 11:11:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a wet kit or hydraulic tank to hide a mini servo inside to actuate a lift axle on a 14th scale RC truck. It also has a slot to glue two servo extensions into so you can run functions on the trailer without needing to take the body off to plug or unplug servos.

There are no mounting holes in the file, as I designed it to be printed with 100% infill and you can drill the mounting holes where you need them. The base is slightly wider than the frame rails.

There are also no servo mounts inside, I designed it to just double sided tape mount the servo inside the tank. As I didn't plan on the lift axle taking any load, its for aesthetics more than anything. As most people swap the truck's leaf springs out for something sold to hold more weight.