BetaFPV Pav20 旅行箱

BetaFPV Pav20 Tranvel Case

2024-05-04 22:08:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This my own take on travel case for BetaFPV Pavo20

I tried make the case compact and make all the spaces useful:

There are 3 versions of different height:

Standard Version:
this version features a big battery storage space (6 pcs) under the quad, and 4 pcs on the mid section.(assume the batteries are 450mah)
Parts to Print:
Pavo20BaseStd
Pav20Mid
Pavo20CaseCapV2
Clips

Slim Version:
Some how I feel the standard version is too big, so I modified it to this slim version, removed all the under quad battery space. Only 4 batteries can be stored.
Parts to Print:
Pavo20BaseSlim
Pav20Mid
Pavo20CaseCapV2
Clips

FlippedSlimVersion:
After using both previous version, I feels the 2 later design is kind of annoying when I just want to open one layer. And the center of mass is pretty high casing the case to tip over when opened. So made a new version to have all the batteries on the bottom , and flipped the quad upside-down to save space.
Parts to Print:
Pavo20BaseSlim V2
Pavo20CaseCapV2
Clips

OtherParts:

All the hinges and clips using M3 screws and nuts:
M3x30 screw : 8
M3 lock nuts : 8