3D打印用干燥盒

Filament Drybox

2024-05-05 00:21:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Combined a bunch of others drybox designs to create my existing setup.

List of Purchased Parts:

EZY Drybox 18L/19Qt from HomeDepot
Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one woould be ideal.
PTFE Connectors from AliExpress
- Used a total of 9 PTFE connectors on my setup.
PTFE Tube from AliExpress
- Got the 2m since its cheap. Only used a little less than a meter in total.
Humidity/Temp Sensor from AliExpress
M3 Hardware Hex Screw from Aliexpress
- Got the M3 282 piece kit.
- 20x M3 3x10 screws (All used for the filament guides on the drybox and on temp
  sensor on the drybox)
- 6x M3 3x20 Screws (Used on sillica case, 3 screws each)
- All screw used with M3 Hex nut
Fillamet Roll Bearings from AliExpress
- 4x 608zz bearings for each roll, 16 total in drybox
Sillica Gel from AliExpress

List of Printed Parts:

Lack_Guide_Top/Bottom - Remixed Rimbalin's filament guide to be able to screw PTFE connector into it
- Printed QTY: 1
Bearing_Support - Used ReaperOfThresh's Bearing Support to better hold the spools in place while on the bearings
- Printed QTY: 16
Roll_Base - Used nameek's Filament Base to hold the rods that the spools are placed on.
- Printed QTY: 2
DryBox_Guide - Used Max Mustermann's filament guide to feed filament out of drybox and back in when roll is not in use.
- Printed QTY: 16
I designed a rough silica case, which is what im still using. Biggest flaw is where the screw holes are. Haven't had time to redesign.
- Printed QTY: 4
I designed the sensor holder
- Printed QTY: 1

Print

Printer: Prusa MK3S
Fillament: Hatchbox Orange PLA
Infill: 15%
Supports: No

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Infill:
15
Filament brand:
Hatchbox
Filament color:
Orange
Filament material:
PLA

Tags

License

CC BY-NC

Filament Drybox
byrod5is licensed under theCreative Commons - Attribution - Non-Commerciallicense.

3D打印用干燥盒

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

3D模型：JeNo DJI长安桥+Immortal_T
2023-08-25
LDRC Drift Extended Axle with Spacer
2024-03-21
雌性独眼巨人
2024-04-17
3D模型：dlugos7
2024-04-20
卫生间门传感器
2024-05-02

最热下载

最新模型