Etha 2 & EMEK 后盖，地缘风格，行星日食

Etha 2 & EMEK Back Cap, Geo-Style, Planet Eclipse

2024-05-05 04:13:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple back cap for your Etha 2 or Emek paintball marker, replacing the fat stock one. It's styled like the original back cap from Geo 2 and Geo 3.

Can be printed out of any basic material. Print out of PA-GF30 to match material of Planet Eclipse's original back cap. This material is not necessary and can be printed out of PLA, PETG, and other basic print materials with no issue.

I chose to print with the three pegs facing down, and using supports all around the pegs on that bottom surface. The con is that you'll have to spend some time removing all that support and cleaning up around the three pegs.