头骨之塔

Skull Tower

2023-03-26 21:06:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

每个地窖都需要一个‘骷髅塔’。

I was playing around with assembling something like this using a variety of different skulls on Thingiverse but the manifold/face collisions and polygon count would always seem to crash the different programs I used and were just too unwieldy; I finally found a good mix of skulls that work well together after some mild modifications. There are still some odd bits of geometry in here but for the most part they print in about 35minutes; they can probably be optimized a bit more; I am finding that different programs output a variety of different stl model sizes and no two work the same in terms of efficiency/optimizing.
This is loosely based on an old Ral Partha tower of skull metal miniature I have and some books that I've been scanning through about The Catacombs of Paris; I created this for use in a Warhammer Quest terrain setting and a Library of Whispers scenario.
Two models of different height and size are included. If I make up a round base/top I will update the files. Tallest scale height is 50mm w/around 30mm base; easily scaled as needed or use the smaller version which has a few more skulls
Split file included; so you can print in two parts and 'weld' it back together w/o using supports
updated; apparently I left some floating polygons during the split for the right side so it makes it difficult to lay it flat on the build plate; the new file is: skull_square_02_right_fixed

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Valorant 杰特的姿态
2023-03-26
螺旋齿轮玩具3D模型
2023-03-26
通用型1/10比例底盘 - DKS基础款
2023-03-26
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）
2023-03-26
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程
2024-05-02

最新模型