用于 Ender 3 Pro 的带挤出机和热端安装的超薄 X 轴电缆链

Slim X Axis Cable Chain with Extruder and Hotend Mount for Ender 3 Pro

2023-03-26 21:06:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text describes a detailed guide for installing a cable chain on a 3D printer, specifically focusing on the Y and Z axes. Here's a breakdown of the key information: **Parts Needed:** * 1x Extruder mount bracket * 16 x Ultra-thin chain links * 16 x Thin link covers **Important Considerations:** * **Extruder Type:** The guide specifies different bracket options depending on the type of extruder you have (stock, aluminum single drive, or aluminum dual drive). Make sure to choose the correct bracket for your printer. * **Printing Settings:** The guide recommends printing the parts with a layer height of 0.2 mm, 3 perimeter walls, and 20% infill (honeycomb pattern). **Installation Steps:** 1. **Prepare Cables:** Remove cable ties holding the cables together and retract the filament. 2. **Remove Extruder:** Remove the spring from the extruder, then remove the extruder itself. 3. **Install Hotend Mount & Cable Links:** Install the hotend mount bracket, secure the cables with zip ties, and attach the link covers to the chain links. Connect them to the hotend mount. 4. **Prepare Z-Axis Assembly:** Remove two bolts from the z-axis assembly and carefully detach it. Pay attention to the four small spring washers. Ensure the z-axis assembly remains secure. 5. **Install Extruder Mount:** Slide the extruder mount onto the z-axis rod, placing cables inside the mount's interior. Use zip ties to temporarily secure the cables before tightening them fully. 6. **Secure Extruder Mount & Cables:** Tighten the bolts securing the extruder mount to the z-axis assembly. Ensure proper alignment. Remember to only use the two bottom spring washers. Connect the cable chain to the extruder mount and secure the cables with zip ties on both the X axis and Z axis. 7. **Optional: PTFE Tube & Filament Guide:** You can optionally add PTFE tube and remove any filament guides at the top of the printer. 8. **Reassemble Extruder:** Reinstall the spring and lever onto the extruder assembly in reverse order. 9. **Install Cable Chain on Z-Axis:** Repeat the process for installing the cable chain on the Z-axis, following the same steps as before. **Tips:** * Ensure all links move freely. * Pay attention to the orientation of cable claws (if applicable). * Use zip ties to secure cables at multiple points. * Double-check alignment before tightening bolts. Let me know if you have any further questions!用于 Ender 3 Pro 的带挤出机和热端安装的超薄 X 轴电缆链

朋友，你觉得上面这个模型，属于下面的哪个分类？