鸟 buddy 附件扩展模块

Bird Buddy Accessory Extension

2024-05-06 02:03:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple 6cm extension for Bird Buddy accessories. Attaches with an M5 screw and allows accessories to be added at an offset to the factory mount point.

An M5x8x7 heat-inset threaded insert is required. A shorter one should probably be fine.
I am using the ones from this set:https://www.amazon.com/Mardatt-Threaded-Embedment-Assortment-Printing/dp/B08ZHFLDNQ

Depending on filament, the hole for the insert may be a bit small, so so material may have to be cut away (or pushed out with a screw) after insertion.

I recommend printing in ASA for long-term stability, but PLA should be fine for quite a while.

If this is useful for you, please consider buying me a coffee!https://ko-fi.com/grajohnt