144001 后部扰流板

144001 Rear Spoiler

2024-05-06 05:38:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This spoiler is a remix of akselsson1's design. I deleted the holes so it can be used either on the stock spoiler mount, or the upgrade body kit from AliExpress (see pics of the cheap plastic spoiler provided by Ali). The "upgaded" spoiler broke pretty quickly so I put my 144001 away for a year, and upon purchasing the SE I tried unsuccessfully to find one for the aftermarket mount. I tried printing with PLA, but it shattered and split on the first impact. I used autobrim to anchor it during printing.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
none
Filament brand:
Creality
Filament color:
White
Filament material:
ABS or PETG
Notes:
You can see in the up close pic of the white spoiler (which was the failed PLA version) that I cut off and saved the elevated mounts for the "upgraded" spoiler so that the original screws don't bottom out with the thinner spoiler.