T-28 鼓鼻减重架加固

T-28 Nose Gear reinforcement

2024-05-06 07:48:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Repair cracked nosewheel support in Parkzone 1.1M T-28 (White & Yellow).
I use UV glue to glue the plastic back together. Then use Dremel burr and make glue flush with the plastic. Insert the Block and drill small holes through the original plastic backplate. Install the shim behind the firewall using epoxy. Remove the nose block, add epoxy to the front of the firewall and nose block. Use 2 M2 x 12 screws to mount the block and shim. You will have to trim some plastic off the bottom of the shim to get the screw holes to align. Tighten the screws and let the epoxy dry.

Happy Landings!

Print Settings

Printer brand:
Creality
Printer:
Ender-5 Plus
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament brand:
Any
Filament color:
Any
Filament material:
PETG
Notes:
Layer Height: 0.2
Walls: 3
Temp: 230
Bed: 60
Top/Bottom Layers: 3
Infill 30%

T-28 鼓鼻减重架加固

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型