卡塔琳娜22型船模桅杆门
Catalina 22 Mastgate
2024-05-08 09:40:41
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A Mast Gate for a 1970-1985 oval style Catalina 22 mast. This may work on other masts with a similar profile.
This is a remix of noveltek1's mast gate for a Catalina 25, and should work on that mast as well.
The original was slightly bigger than would fit in my mast without breaking in half. I thickened the walls of the track, and switched the bolt holes for a 2.5" velcro strap slot.
My boat is not currently on the water, so this is yet untested.
Currently printed in PETG, but will print a new one in ASA if it works as expected.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Plus
- Rafts:No
- Supports:Yes
- Resolution:.2
- Infill:100%
- Filament brand:
UNK
- Filament color:
Black
- Filament material:
PETG
Post-Printing
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Cup Holder for Game Table2024-03-14 -
Ikea 米兹顿 插嵌2024-04-20 -
床底2024-04-22 -
乐高 - Arduino Uno 3D模型2024-04-30
最热下载
-
全能3D打印机测试2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GPD Win3 把手型号2023-04-07 -
完全可打印的无人机框架2023-05-31 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
HGX lite v2支架2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
高跟鞋鞋架2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16