prime line C1254 patio door key lock stabilizer

2024-05-08 03:33:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I want a key lock on my patio door.
The one with the proper spacing is a Prime Line C 1254.
But the lock cylinder is not supported in the handle and woggles around.
(I think that is the technical term.)
These two parts fill in around the key cylinder and center it in the handle.
And the handle doesn't come with the screws and there is no mention of what screws to purchase.
I found these 10-24 screws from home depot fit the handle threads and I will cut them to the required length.
I still have to re-key the cylinder but I have done that before and while it is fiddly (another technical term) I have been successful in the past.
Best of luck.

Print two of each part.
I think I printed them at 20%
I used PETG but they won't see the light of day so PLA should last just as long.