Cubicon Prime M22Z 重新设计版导出器缆模块

Cubicon Prime M22Z Redesigned Extruder Cable Block

2024-04-15 12:34:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replaces original. Cable is looped upwards and out of the way. Remaining back half of the cable is direct to the side. Filament sensor is move closer to the spool holder.

I found the deign of the original is poor and causes cable interference with the filament on taller prints. This design keeps the cable up and out of the way

Print Settings

Printer:
Cubicon Prime M22Z
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
20%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA+
Notes:
Brim suggested, turn on supports for inset screw, but not really necessary. Use original screws to attach