3dsjs

The Bug Catcher 2000

2023-03-26 21:18:32

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

2000版虫子捕捉器

我们住在一栋旧房子里,里面有很多虫子,所以直到我能弄清楚它们是怎么进入我的房子的,我家人想找到一种不用碰到它们的方法,把这些虫子带到外面。我就做了一个叫做2000版虫子捕捉器!

这个项目效果很好,也是一个有趣的项目。它就像一把剪刀一样,开合得很顺畅!我用可弯曲的纤维素打印了白色部分,看起来非常漂亮,并且确保虫子不会被压扁,但任何材料都可以使用。

这个版本真的不错,但我觉得下一个版本会更厉害!我希望很快就能开始设计更新版,但我有很多愚蠢的项目要完成,所以不知道什么时候才能完成它。让我知道你有什么改进建议,或者想看到另一个版本吗?

打印

I printed the legs out of PLA and the dome and tray out of sainsmart tpu so your bug does not get squashed if you accidentally close it one of them. I used a pillar of support in the middle of the dome. The rest of the parts don't require supports. The stl's are in "Inch" sale so scale them 25.4x's or 2540%.

组装

Snap the legs together and use super glue to bond the dome and the tray to the legs. If the legs want to fall off the hinge put a short bit of filament in the center of the hinge to keep the legs together. See the picture with a close up view of the hinge.

Here are my Amazon affiliate links for filament I used to make it!

Sainsmart White TPU用于穹顶和托盘:https://amzn.to/2T89EBk(手头最好的TPU)

Hatchbox Red PLA用于腿部:https://amzn.to/2TaB21C

The Bug Catcher 2000
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15