3D模型：丝绳支架器 - 适合真空袋包装

Filament Spool Holder - Vacuum Bag Friendly

2023-07-22 18:32:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Filament spool holder that works for vacuum bagged spools as well as unwrapped spools, with hexagons, because hexagons are the bestagons. Made this for myself as I had a shallow space in a closet that would fit spools held parallel to the wall but not perpendicular. I figured someone else might be in the same situation down the line.

Connecting plate ensures all brackets are equally spaced for easy installation (I wanted to put up a bunch of these and didn't want to have to worry about spacing and leveling separate brackets.

Use tree supports just for the 90 degree overhangs. I set the support overhang level to 88 degrees and that worked great.

Assembly:
Slot the connector plate and connector rod into one side, then connect to the other side until connector plate is tight. (Fit is tight on purpose - use a raft or just file down the nubs until it fits.)
Once assembled, you can level it on the wall as one piece.

I used 3M double sided VHB tape to mount mine to the wall, it seems plenty strong to hold a full spool but no idea on longevity. Otherwise use #8 or #6 flathead screws.

Thanks to senditbro for the original hook design.