金属管压扁机

Metal Tubing Flattener

2023-03-26 11:25:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I designed these parts to flatten some 5/16 stainless tubing with a 0.028" wall thickness to create an air nozzle shape desired by my coworkers. If the tubing is pressed with two flat plates, it will cause the tubing to deform unevenly and collapse the center. These die plates incorporate a small groove down the center to support and evenly distribute the pressing force. By sliding stock tube all the way through the die, the flattened section is supported by the nondeformed sections on either side making for an even deformation without buckling the very end of the tubing.

I suggest printing the die plates standing upright with supports and place the seam on the back to give the inside of the plates a smooth even finish. The higher the infill percentage on the die plates, the better.

To use this tool, simply place 5/16 tubing through the holes in the outer die guides and clamp the sides with small binder clips. Next, sandwich the die plates on either side of the tubing and position in a bench vice. Use the vice to evenly press in the die plates until the back faces are flush with the faces of the guides. This should result in a tube with a ~11mm wide flattened section.

This design could be easily altered for other diameters/flattened thicknesses.

Printed in ABS on Stratasys Fortus 250mc

金属管压扁机

朋友，你觉得上面这个模型，属于下面的哪个分类？