酒桶制作者

The wine barrel planter

2023-03-26 12:56:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

The wine barrel planter really consists of 19 single staves which give the barrel a realistic look. The barrel is 8,5 cm (3.3 inches) high and 9,7 cm (3.82 inches) wide. The inner pot has an inner diameter of 7,5 cm (2.9 inches) and an inner heigth of 6,8 cm (2.7 inches).

Please do not resize the model in your slicer, as the tolerances are designed for the present size.

The inner pot should be printed in PETG or a similar material to make it resistant against the humid soil.

If you need another wine barrel without the flower pot functionality, you might consider my following Thingiverse objects:

https://www.thingiverse.com/thing:5390822
https://www.thingiverse.com/thing:5396937
https://www.thingiverse.com/thing:5428998
https://www.thingiverse.com/thing:5429028

List of items to print:

Planter stave V1.stl
Print this item 19 times in a brown color.
Planter cover bottom V1.stl
Print this item once in a brown color.
Planter cover top V1.stl
Print this item once in a brown color.
Planter ring small V1.stl
Print this item once in any color you like.
Planter ring large V1.stl
Print this item once in any color you like.
Planter inner pot V1.stl
Print this item once in any color you like in PETG or another water resistant material.
Planter stave +1mm V1.stl
Planter stave -1mm V1.stl
Print in a brown color only if the staves do not form the 360 degrees angle.
Use these segments as a substitution for one or more normal segments. Example: If there is a 2 mm gap, exchange 2 normal segments against 2 segments which are 1 mm wider each.

The assembly is easier than the assembly of my other barrels. You will need a rubber band to avoid frustration. Please look at the assembly instructions further down. No glue is needed, everything comes together nicely.

Enjoy printing this object.

酒桶制作者

朋友，你觉得上面这个模型，属于下面的哪个分类？