Walking 1U Cubesat

Walking 1U cubesat

2023-04-29 19:12:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text appears to be a shopping list for building a type of drone or RC vehicle, likely focused on the power and control systems. Here's a breakdown: **Power Systems:** * **XL4015 DC-DC Converters (x2):** These are step-down converters used to reduce voltage from a battery source to a lower voltage needed by various components. * **Smaller DC-DC Converter (x1):** Likely for a different voltage requirement or component. * **Magnetic Battery Holders (x3, "1S"):** These hold batteries in place and are likely designed for a specific type of LiPo battery pack (1S means a single series cell). * **Swing 5300 Batteries (x3):** This suggests high-capacity lithium polymer (LiPo) batteries. **Flight/Control Systems:** * **Camera:** Indicates the drone or RC vehicle is likely equipped with an onboard camera for recording. * **Video Transmitter (VTX03 or ATX03):** Transmits the video signal from the camera to a ground station for viewing. * **PS2 Controller & Receiver:** A PlayStation 2 gamepad and its receiver will be used to control the drone. **Connectors and Wiring:** * **XT30, XT60 Connectors:** These are common connectors used in RC applications, particularly for high current connections like motor power. * **JST Connector:** Smaller connector likely used for signal wiring or sensors. * **KCD1-101 Switches (x2):** May be used for power on/off or other control functions. * **XH2.54 Connectors:** Another type of common connector, often used for smaller wires and circuits. **Arduino Components:** * **Touch Sensors (various types):** These allow the drone to sense its surroundings or react to user input. **Mechanical Components:** * **Copper M3 Standoffs:** Used to raise electronic components off a circuit board for better airflow and mounting. * **MF63ZZ Bearings (x12):** Small bearings likely used in motors, propellers, or other moving parts. * **M3 Screws & Nuts (various quantities):** Used for assembly and securing components. **Overall:** This shopping list suggests a project involving building an RC drone or vehicle that incorporates various sensors, cameras, power systems, and a custom control system based on Arduino microcontrollers.Walking 1U Cubesat

朋友，你觉得上面这个模型，属于下面的哪个分类？