H0级铁矿车（低边缘设计，无刹车功能）3D模型

H0 iron ore car (low sides, no brakes)

2023-03-26 13:06:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Model of an old iron ore car as used by the Espérance-Longdoz steelworks in Seraing, Belgium. Other companies in France and Luxemburg used the same or very similar cars.

These cars were probably built in the 1920's and transported many tons or iron ore from the mines in northern France and later the port of Antwerp to the blast furnaces in Seraing. They survived in this role well into the 1960's. After the arrival of more modern ore cars many of these older types were used to transport coke around seraing.

I designed this model using the main dimensions on the rolling stock fiche and photo's of related cars, as I found only one photo of these actual cars in very poor resolution:
https://collections.saicom.be/index.php/Detail/objects/24631
There are two fiches showing these cars so they must have been built as 2 distinct series, but as all dimensions seem to be the same they were probably the same or very similar anyway.

Extra stuff needed to complete this car:
Symoba 111 coupler mechanisms
point bearing axles,length 24,5mm, wheel diameter 10,5mm. Preferably spoked wheels.
2 short self-tapping screws 2mm diameter
decals (dxf vector drawing for 1960's version included)

instructions: I added the instruction picture of the luxury version with brake cab because I am lazy. Maybe one day you'll be able to forgive me.

Printing: I printed the body "upside down" as the top is pretty easy to clean up after removing the supports. Set it at a bit of an angle to prevent print lines through the subtle panelling on the sides.

H0级铁矿车（低边缘设计，无刹车功能）3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？