O'Cello 平面式预放大器安装架（2×20×20毫米 S型曲线）

O'Cello Flat Pre-Amp Mount for 2x20x20mm S-Curve

2023-05-05 13:54:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

The provided text describes a 3D printed object, likely an amplifier bracket for a specific electronic component ("O'Cello"). Here's a breakdown of the information: * **Object:** A bracket designed to hold an O'Cello flat preamplifier with a "2x20x20mm S curve". * **3D Model:** The text includes SVG code which represents the 3D model of the bracket. This allows for visualization and potential printing. * **Source:** The object was created by "Inventor Ian" and is available on Thingiverse: [https://www.thingiverse.com/thing:6008394](https://www.thingiverse.com/thing:6008394). * **License:** The object is licensed under a Creative Commons Attribution-NonCommercial 4.0 license (CC BY-NC). This means users are free to use, share, and modify the design for non-commercial purposes, but they must attribute the original creator ("Inventor Ian"). **Key Takeaways:** * This text provides information about a specific 3D printable object and its origin. * The included SVG code allows for viewing and potentially printing the model. * Thingiverse is a platform for sharing and downloading 3D models. Let me know if you have any other questions about this text!O'Cello 平面式预放大器安装架（2×20×20毫米 S型曲线）

朋友，你觉得上面这个模型，属于下面的哪个分类？