F-35 Lightning II套件卡片

F-35 Lightning II Kit Card

2023-05-10 13:27:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

F-35 Lightning II is the United States' newest fighter, developed and produced by Lockheed Martin. The F-35 is a 5th Gen multirole stealth fighter, resulting from the Joint Strike Fighter program. The JSF program aimed at providing an airframe that could fulfill the roles of the F-16, A-10, F/A-18, and AV-8B. Instead of one aircraft, three different variants share a similar airframe. The F-35A is the conventional takeoff and landing (CTOL) with an internal GAU-22 gatling cannon entering service in the USAF on August 2, 2016. The F-35B is the Short Takeoff and Vertical Landing (STOVL) variant. Lacking an internal gun, it entered service in the USMC on July 31, 2015. The F-35C is the carrier-based variant, with a stronger arrester hook, more robust landing gear, larger wings, and the highest fuel capacity of the three. It entered service in the USN on February 28, 2019. The F-35 has seen major export to many NATO countries, such as Australia, Belgium, Canada, Germany, and Israel.

This kit card was suggested by justin m. If you don't see an aircraft or helicopter that you like, feel free to suggest or commission it!

For best results print at 0.20mm layer height and %100 infill. Anything else and the kit card may not fit together correctly. Both Sprue and Sprue-less models included along with the individual parts. This kit card requires no glue. If you are printing with the individual parts you will want:

Wing x1

Fuselage/Landing Gear x1

Tail/Landing Gear L/R x1

If printing the F-35C with wings folded your will want:

Wing Folded x1

Fuselage/Landing Gear x1

Tail/Landing Gear L/R x1

Wing Spar x2

Wing Tip x2

Want to support these models and receive benefits? Consider checking out my Patreon: https://www.patreon.com/PhabulousPhantom

Want to sell physical prints of my models? Subscribe to Tier 3 of my Patreon: https://www.patreon.com/PhabulousPhantom