宝石盒子（定位打印）

Gem Box (Print in Place)

2023-05-11 00:27:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

IMPORTANT: READ PRINT SETTINGS MISC BEFORE PRINTING.

Ever needed a way to keep a specific sized gem with a specific shape protected? Now you have one! Note: This is decorative, and uses a lot of filament. Please be advised.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
15%
Filament brand:
Overture
Filament color:
Matt Black
Filament material:
PLA
Notes:
Main - Printer settings listed above. (This required good cooling.)
Cover - Supports, no rafts, 10% infill, and Matt Black Overture PLA. (Instead of supports, you can also use cooling.)
Gem - Supports, rafts, 10% infill, and Blue Overture PLA, and Size Down by 3%. (Alternatively you can flip the gem upside down to replace supports, but if you don't, make sure it has supports after slicing it!)