FLEXTAILGEAR Max Pump Adapter for Qomotop Mattress

2023-05-11 10:12:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

FLEXTAILGEAR Max Pump Adapter for Qomotop Mattress

Summary

Adapter for attaching FLEXTAILGEAR MAX Pump to the Qomotop Air Mattress for easier inflation/deflation. Pump didn't come with an adapter that fit the air mattress ports, so decided to design one. Fits both inflater & deflator openings on the pump nice and snug.

Modeled for this pump: https://a.co/d/7vaCFdh
Modeled for this mattress: https://a.co/d/eytrmU3

This could easily be tweaked to use as a replacement for the mattress screw cap if needed by closing up the through-hole.

Print Settings

Printer brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10%
Filament brand:
RoHS
Filament color:
Translucent Blue
Filament material:
PETG
Notes:
Could be printed in PLA just fine.

My PETG settings for CR6-SE:
• Blue painters tap on bed
• Glue stick
• +.2 z-axis
• 225 F nozzle
• 75 F bed

How I Designed This

Process

Measured threads on the mattress screw cap and replicated in SketchUp. Essentially recreated the screw cap, but put a hole through it to friction-fit the pump.

Started with a super simple prototype to make sure measurements for the threading and pump were at least close - which they were! Then spent a good amount of time dialing in the threading.