树脂VAT/储罐排空沟槽

Resin VAT / Tank draining funnel

2023-03-26 13:53:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

我创建了这个漏斗，因为最常用的漏斗只能收集手动倒入它们中的树脂，但我不得不站在那里等待20分钟才能完成。

I designed two versions. Both should fit most printer resin vats but if you place a Anycubic Mono X/X2 vat in there, the center of gravity should be pretty much exactly over the center of the bottle.

Version one is probably safer to use as it holds the resin vat straight up. The issue is that on some vats a tiny little bit of resin might still be left in the vat when done. That's the one used in the pictures.
nThe second version has the resin vat at an angle so that all of the resin should come out. Depending on how messy your vat is, some of the resin might run down the sides, though, and then potentially make a mess. I'd be curious about your comments on this one.

Speaking of bottles, this fits (properly) Anycubic bottles as well as Siraya Tech bottles. Once using the inside ring and one is using the outside ring. Important to note is that this is an actual funnel so if you handle this properly, no drop will go anywhere else but into the bottle.

The metal filters from this funnel can be used to filter the resin. Kinda cool, actually.
https://www.amazon.com/dp/B094JD7T7V?psc=1&ref=ppx_yo2ov_dt_b_product_details

树脂VAT/储罐排空沟槽

朋友，你觉得上面这个模型，属于下面的哪个分类？