创实声控滚筒支架

Creality Sonic Pad Spool Mount

2023-05-12 12:00:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was looking for a simple way to mount my sonic pad to my Ender 3 S1, but didn't want it on the side or hanging off the upper cross member blocking access to the filament spool.

My solution was to mount it to the left of the spool using the self locking mechanism on the stock spool holder.

V3 mounts on the left side of spool holder
V3_RH mounts on the Right side of spool holder

Simply unscrew the stock arms on your Sonic Pad and use the screws to attach it to the spool holder mount. You will need (2) M3 x 10 hex socket head screws to attach the lower mount holes. From there, simply twist it into place on the spool holder

I printed it with the main section horizontal (arms pointing up) with no issues. I used supports for under the arms as they are not 100% parallel with the main body.

If you are comfortable soldering, you might also want to consider wiring up the extra USB connection on the main board. That way you can run it out the bottom of the printer body and not have a USB constantly plugged in the front of your printer. Here is a link https://www.instructables.com/Ender-3-S1-Internal-USB/ (I was able to use the wire from a wired mouse and simply crimped on the appropriately sized pins)

To keep the cables in check I used a bit of fire resistant cable cover for automotive use.