Mean Well LRS-150电源模块

Mean Well Power Supply LRS-150 IEC Cord, switch, and output terminal housing

2023-03-26 14:14:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This is a simple cover for a Mean Well LRS-150 power supply that will hold an IEC power cord adapter, power switch, and output terminals/plugs.

All hardware used to mount the PS and cover is M3. The cover mounting holes are sized for self-tapping screws, but could be drilled out to 4mm to fit M3 heat-set nuts (like I did).

The IEC socket I used is an "Oiyagai 4pcs IEC320 C14 Inlet Module Connector Fuse Switch". The power jack is an "E-outstanding 5-Pack DC-099 5.5 mm x 2.1mm 30V 10A DC Power Jack". The banana jacks are "CenryKay 20pcs Terminal Wire Connectors 4mm Banana Socket". All of these parts were purchased on Amazon.

I printed this in PLA with 100% infill. The "complete" model has the cover installed, which can easily be extracted from the main box with a chisel or X-Acto knife (be careful!). Printing of the "complete" model can be done without supports because there are no overhangs. Additional models and the original Blender model is included.

I hope this helps and is interesting. I needed this for a bench-mounted 24V supply, to prevent the 110V input and other wiring from flapping around in the breeze. Feel free to remix, alter, and reprint as you wish. Enjoy!!

Mean Well LRS-150电源模块

朋友，你觉得上面这个模型，属于下面的哪个分类？