墙挂式模型展示盒支架

Brackets for Wall Mounted Model Display Case (Cake Box)

2023-03-26 15:06:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

拖延未完成项目的问题在于，你容易忘记需要完成的事情。

为什么?

一切都源于我想要保护我的Heavy Object 3D打印免受家中可怕的灰尘侵害。我开始寻找不透明的展示盒，但对于我所需的尺寸，我每个盒子都要花近30美元。这并不是一个糟糕的价格，但由于我和我的模型都很省钱，所以我并不需要外观或结构上好的东西，因此我觉得可以用更便宜的东西代替，结果在网上浏览时偶然发现了这些。

资源
n这款蛋糕盒的原型是：Amazon, Web Archive
n示范模型：Indigo Plasma by GreenTeaRice

预期结果

I wouldn't recommend putting anything that weights more than a pound on this. The cardboard base is more than strong enough, but I completely doubt my bracket design.

I made this to be printed on an Ender 3, which means the length of the brackets can only go to the middle of the box, and that means you're going to want to make sure most of the weight of your item is behind the fulcrum point (pretty much the center) otherwise it's likely the box will tip off the brackets. I did try to mitigate this, though.

Though, you may be able to remix them to include support ledges along the top of the sides to help prevent that. I preferred having them easily removable, though.

免责声明

Don't take the renders too seriously, as the box is not a 1:1 copy. I only made it so that I could visualize how my models would look before making them.

The notches on the box also aren't perfect, as my IRL box fits flush to the back of the bracket, but not on my model I think the reason is because I went back and made the bracket notches longer, but my fillets aren't real life accurate.

n墙挂式模型展示盒支架

朋友，你觉得上面这个模型，属于下面的哪个分类？