Cris Rosser的AOS 5.5（V2）DJO O3空气单元和天线支架

Cris Rosser's AOS 5.5 (V2) DJO O3 Air Unit and Antenna Mount

2023-05-28 00:13:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For Cris Rosser's AOS 5.5 (V2)

This mount lets you install the O3 Air Unit at the rear mounting in combination with my O3 Cam Mount https://www.thingiverse.com/thing:6041189. The mount shifts the unit just a few mm towards the front, otherwise, the stock 12 cm cable would be too short to fit.
This way, the antenna can be placed at the back side of the frame without the need for longer antenna pigtails.

You will need the following hardware:

M1.6 screws to attach the unit to the mount (I used slightly longer ones, but the stock srcews will probably also work)
M2 x 5mm scews + M2 nuts to attach the mount to the frame